SpecChem > Products > Decorative & Protective Sealers > All Shield WB

All Shield WB

Modified silane-siloxane concrete protectant

All Shield WB is an advanced, low VOC, water-based, synthetic-modified, silane-siloxane protectant designed for concrete and stone. This product offers a clear, penetrating, and breathable layer that effectively resists oil, water, food stains, and various liquid contaminants. Suitable for both interior and exterior applications on horizontal and vertical surfaces, All Shield WB creates a durable barrier against moisture, staining, and deicing salts.

  • Provides excellent repellence against oil, water, and stains, especially from motor oil and de-icing salts.
  • Compliant with OTC, LADCO, and SCAQMD regulations due to its low VOC formulation.
  • Effectively reduces water penetration, minimizing freeze-thaw damage and weathering impacts.
  • Delivers long-lasting protection for both newly constructed and existing concrete and stone surfaces.
  • Quick to dry, leaving a tack-free and skid-resistant finish.
  • Water-based, colorless, and non-yellowing solution.
  • USDA approved for indirect food contact areas.
Tech Sheet
Safety Sheet
Sell Sheet
Spanish Tech Sheet

Application

All Shield WB is ideal for protecting a broad range of surfaces, including commercial and industrial floors, automotive service areas, pavements, driveways, brick, concrete pavers, parking structures, bridges, and marine platforms. It offers robust defense against the detrimental effects of de-icing salts, moisture, and environmental wear.

Application Instructions: Apply All Shield WB generously with a low-pressure sprayer, ensuring proper safety measures such as respirator use and ventilation. Coverage rates vary based on surface porosity. For new concrete, ensure the surface is dry and well-cured (minimum of 21 days) before application. The substrate must be clean and free from moisture, oil, and other contaminants. Agitate well before each use.

Packaging

Available in 55-gallon drums, 5-gallon pails, and 1-gallon jugs (4 per case).

Test Data

Technical Specifications:

  • Composition: Modified fluoropolymer, silane/siloxane blend.
  • Flash Point: Greater than 200°F.
  • Shelf Life: 12 months.
  • Appearance: Water clear.
  • UV Resistance: Excellent.

Cleaning

Clean spills and contaminants promptly to maintain surface integrity. Use clean water or a pressure washer for routine cleaning. For tougher stains, a diluted solution of SpecChem Orange Peel or Berry Clean can be used, followed by a thorough rinse with clean water. Reapplication of All Shield WB may be necessary after extensive cleaning.