SpecPoxy Coating
100% solids high-build epoxy coating
SpecPoxy Coating is a two-component, high-performance epoxy coating system designed to provide excellent abrasion resistance and chemical protection to concrete and steel surfaces. This system is available in a selection of colors including Standard Gray, Clear, Red, Beige, and Black, offering not only performance but also aesthetic enhancement.
Applications
- Food/chemical processing plants
- Auto/truck repair bays
- Warehouse floors
- Manufacturing plants
- Floor restoration projects
- Provides superior wear resistance under traffic
- Excellent resistance to a variety of chemicals
- Achieves a hard, glossy finish
- VOC compliant with a content of 0 grams per liter
- Can be applied as a non-slip floor finish
- Available in multiple colors
- No separate primer required
Application
- Concrete Surface Preparation: Concrete must be at least 28 days old with all curing compounds and sealers removed, cleaned, and mechanically prepared to open the surface texture.
- Steel Surface Preparation: All metal surfaces must be free of contaminants and sandblasted to white metal.
- Mixing: Condition materials to 60°F – 90°F. Mix Parts A and B separately for one minute each, then together for three minutes.
- Placement: Apply by notched squeegee or roller, back roll with a spiked roller to reduce surface imperfections and improve bond.
Packaging
- Available in 3 gallon units (2 – 1 gal. Part A Resin & 1-gal. Part B Hardener) and 15 gallon units.
Shelf Life
- Store in original containers, tightly closed, and do not allow accumulation of water or contaminants. The shelf life is two years from the date of manufacture.
Test Data
- Coverage: Approximately 75-125 sq-ft per gallon, depending on the surface texture of the concrete.
- Material Requirements: A two-coat application at a rate of 100 sq-ft per gallon per coat produces a 30 mil coating.
- Compressive Strength at 28 days: 11,000 psi
- Hardness (Shore D): 75-85
- Re-coat Time: 6-18 hours
- Suitable for Foot Traffic: 24 hours
- Suitable for Wheel Traffic: 72 hours
- Dry to Touch at 70°F: 3-5 hours
- Pot Life at 70°F: 40-60 minutes
- Mixing Ratio by Volume A to B: 2 to 1
- Total Solids Content: 100%
- Dry Film Thickness: 15 mils per coat
Cleaning
- Clean tools and equipment with solvents such as SpecChem Solvent 100, Xylene, Toluene, or MEK immediately after use.