SpecStrip Ultra Blue
A premium blue reactive form release agent
SpecStrip Ultra Blue is a chemically active release agent designed to ensure a clean release of concrete from wood, steel, and aluminum forms. This product is free from diesel, kerosene, waxes, and silicones, offering a pleasant smell and compatibility with elastomeric and urethane form liners.
- Enhances the release of formwork, reducing concrete buildup
- Minimizes the need for cleaning formwork and liners
- Provides protection against rust
- Leaves no residue, stains, or discoloration on forms
- Effectively extends the life of wood forms and reduces concrete surface voids
Application
- Ensure form surfaces are clean of dirt, rust, scale, and concrete buildup prior to application.
- Recommended to apply using a spray with an atomizing or misting tip for thin, uniform films, enhancing product performance and economic use.
- Typical coverage rates are:
- Steel, Plastic, Fiberglass: 2000 sq ft/gal
- Conditioned Aluminum: 2000 sq ft/gal
- HDO Plywood: 2000 sq ft/gal
- MDO Plywood: 1500 sq ft/gal
- Dimensional Lumber: 1000 sq ft/gal
- BB Grade Plywood: 1000 sq ft/gal
- Remove any excess material or puddles with a squeegee and absorbent rags to avoid over-application and dusting.
Packaging
Available in 275-gallon totes, 55-gallon drums, and 5-gallon pails.
Shelf Life
Two years from the date of manufacture when stored in the original tightly closed containers.
Standards
- VOC content: <250 g/L
- Complies with EPA, Corps of Engineers CEGS-03300, Section 10.8 Form Coating, Navy Dock and Piers 56359, and OTC regulations.