SpecPoxy CJ

100% solids, semi-rigid epoxy control joint filler

SpecPoxy CJ_Cans_COBSpecPoxy C.J. is a two-component, semi-rigid epoxy for filling control and construction joints in industrial concrete floors. This product supports the joint edges and reduces spalling of the edges caused by wheel traffic.

SpecPoxy C.J. has been designed for use in compliance with ACI 302, section 4.10 recommendations for epoxy joint fillers used in saw cut/control joints.

SpecPoxy C.J. is useful for contraction/construction joints that are cut or formed.

SpecPoxy C.J. may be used for the repair of damaged or spalled joint nosing and cracks.

Features & Benefits

  • Easy 1 to 1 mix ratio
  • Pourable gray consistency
  • Moisture insensitive to cure in damp environments
  • High elongation to resist tearing due to excessive movement
  • Semi-rigid flexibility that does not weld slabs together or become brittle with age
  • Optimum hardness to transfer wheel loads while allowing moderate movement

Product File Buttons-01 Product File Buttons-02 TDS Spanish Button-04

Product Resources

August 2018 SpecTech: Control Joints – Tips & Coverage

SpecTech: Product Storage & Shelf Life Guidelines

SpecChem Product Selection Guide

SpecChem Product Category Overview

SpecGuide: SpecChem Product Catalog

Osmotic Hot Weather Guide

Tilt-up on Utilizing a Casting Bed or Stack Cast Panels Guide

Find a Distributor Button-02 Tech Service Button-01-01

SpecChem, LLC ©   All Rights Reserved  |  Privacy Policy
Site Created by KC Web Specialists, LLC.